Education, Science, Technology, Innovation and Life
Open Access
Sign In
  1. Home
  2. Journals
  3. Journal of Precision Instrument and Machinery
  4. Vol 5, Issue 1, 2025

Heat and Mass Transfer Study during the Reduction of Iron Ore Pellets in a Fixed-Bed Reactor

Download as PDF

DOI: 10.23977/jpim.2025.050105 | Downloads: 6 | Views: 155

Author(s)

Chang Xu 1, Jian Pan 2, Congcong Yang 2, Haibin Yang 1

Affiliation(s)

1 Lodestone Technology Co., Ltd., Shanghai, China
2 School of Minerals Processing and Bioengineering, Central South University, Changsha, 410083, China

Corresponding Author

Chang Xu

ABSTRACT

As the pressure of the "dual carbon" target in the steel industry intensifies, the hydrogen-based direct reduction (H2-DR) process has become a key path for green and low-carbon ironmaking due to its significant emission reduction potential. However, the existing process lacks intelligent perception and control capabilities, and cannot accurately grasp the gas-solid heat and mass transfer state in the fixed bed reactor, which limits the reduction efficiency and energy consumption optimization level. To this end, this paper combines computational fluid dynamics (CFD) technology with reaction kinetics modeling methods to construct a numerical model of heat transfer-mass transfer-reaction coupling in the hydrogen reduction pellet process, and conducts high-precision simulation analysis of key parameters such as gas composition (H2/CO/N2), temperature, flow rate, and pellet stacking structure. This paper simulates three typical hydrogen concentration conditions (H2 100%, 80%, 60%) through a two-dimensional axisymmetric model, couples the RNG k-ε turbulence model with the Fe2O3→Fe reduction path, and combines the porous medium model to calculate the heat and mass transfer of the stacked pellet bed. The changes in the temperature field, velocity field and mole fraction distribution of the gas in the reactor are comprehensively analyzed, and the heat transfer efficiency, gas dissipation path and rate control link of the reduction zone are accurately identified. The results show that under the operating temperature of 950°C and the H2 concentration of 82%, the temperature drop of the gas in the pellet bed reaches 80K, the H2 mole fraction decreases by about 17%, and the reaction rate increases to 0.0524 kmol/m³•s, which is much higher than 0.0021 kmol/m³•s under CO conditions.

KEYWORDS

Fixed Bed Reactor; Computational Fluid Dynamics; Iron Ore Pellet Reduction; Heat and Mass Transfer Coupling; Hydrogen Metallurgical Process Optimization

CITE THIS PAPER

Chang Xu, Jian Pan, Congcong Yang, Haibin Yang, Heat and Mass Transfer Study during the Reduction of Iron Ore Pellets in a Fixed-Bed Reactor. Journal of Precision Instrument and Machinery (2025) Vol. 5: 34-44. DOI: http://dx.doi.org/10.23977/jpim.2025.050105.

REFERENCES

[1] Singh A K, Mishra B, Kumar S, et al. Reduction behaviour of iron ore pellets using hardwood biomasses as a reductant for sustainable ironmaking[J]. Biomass Conversion and Biorefinery, 2024, 14(22): 27943-27954.
[2] Das D, Anand A, Gautam S, et al. Assessment of utilization potential of biomass volatiles and biochar as a reducing agent for iron ore pellets[J]. Environmental Technology, 2024, 45(1): 158-169.
[3] Wang S, Shen F, Zheng H, et al. Isothermal Reduction and Avrami–Erofeev Kinetic Model for Reducing Iron Ore Pellets in a 70% N2–30% H2/CO Atmosphere[J]. Journal of Sustainable Metallurgy, 2024, 10(4): 2337-2351.
[4] Kittivinitchnun S, Kowitwarangkul P, Mousa E, et al. Non-Isothermal Reduction Kinetics Model of Self-Reducing Iron Ore Pellets[J]. ISIJ International, 2024, 64(10): 1503-1516.
[5] Bersenev I S, Bragin V V, Gruzdev A I, et al. Features of the iron ore pellets structure depending on the concentrate enrichment degree[J]. Steel in Translation, 2023, 53(4): 328-335.
[6] Mishra S, Mahanta J, Rath S, et al. Reduction roasting followed by pelletization study of concentrate fines of a low grade iron ore[J]. Journal of Sustainable Metallurgy, 2024, 10(2): 442-459.
[7] Hessling O, Fogelström J B, Kojola N, et al. Influence of Water Content on the Kinetics and Mechanisms of Hydrogen Reduction Using Industrial Iron Ore Pellets at 873 K–1173 K[J]. ISIJ International, 2024, 64(10): 1493-1502.
[8] Lyu B, Wang G, Xie S, et al. Effect of hydrogen-rich atmosphere on the reduction behavior and kinetics of iron-ore pellets under non-isothermal conditions[J]. JOM, 2023, 75(5): 1540-1550.
[9] Avula L S B R, Sahoo S K, Kumar M. Comparative study on reduction behaviors of low-and high-grade fired hematite iron ore pellets in coal[J]. Ironmaking & Steelmaking, 2024, 51(10): 1121-1130.
[10] Bersenev I S, Vokhmyakova I S, Ozornin N K, et al. Porosity of Iron-Ore Pellets at Different Stages of Roasting and Reduction[J]. Steel in Translation, 2023, 53(12): 1137-1143.
[11] Claremboux V, Kawatra S K. Iron ore pelletization: Part III. organic binders[J]. Mineral Processing and Extractive Metallurgy Review, 2023, 44(2): 138-154. 

All published work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright © 2016 - 2031 Clausius Scientific Press Inc. All Rights Reserved.