Numerical Simulation Study on Flow Field of Aerospike Rocket Engine Nozzle
DOI: 10.23977/geors.2025.080105 | Downloads: 10 | Views: 718
Author(s)
Yichen Xiang 1, Huikun Zhang 1
Affiliation(s)
1 Key School, Annapolis, MD, 21403, USA
Corresponding Author
Yichen XiangABSTRACT
This study presents a comprehensive numerical investigation of flow field characteristics in aerospike rocket engine nozzles operating under high-pressure conditions (28-35 MPa). With 3 million cells, we conducted a simulation of nominal, overexpanded, and underexpanded operating regimes for an engine with a combustion chamber pressure of 2900~3200 m/s exhaust velocity using high-order computational fluid dynamics k-ε turbulence modelling with enhanced wall treatment on a refined mesh. In the simulations, the maximum exit Mach number for the nominal mode was 3.8, and for underexpansion, 4.2 was reached, increasing the thrust coefficient by an additional ~8%. The pressure oscillation signature for higher pressures displayed distinct frequency shifts that were characteristic of lower pressure operations. The most dramatic pressure fluctuation was at the throat and the spike tip, where the internal pressure dP in the zone critically exceeded 0.25 MPa. These regions had stronger turbulent kinetic energy which was important for the heat transfer and thermal loading in these areas. The new design of the gas plug showed positive results for different ambient pressures which proved the aerospike's altitude compensating feature.
KEYWORDS
Aerospike Rocket Engine, Computational Fluid Dynamics, Unsteady Flow Characteristics, Shock WavesCITE THIS PAPER
Yichen Xiang, Huikun Zhang, Numerical Simulation Study on Flow Field of Aerospike Rocket Engine Nozzle. Geoscience and Remote Sensing (2025) Vol. 8: 39-53. DOI: http://dx.doi.org/10.23977/geors.2025.080105.
REFERENCES
[1] Tian, H., Guo, Z., Hao, Z., Hedong, L., & Li, C. (2020). Numerical and experimental investigation of throttleable hybrid rocket motor with aerospike nozzle. Aerospace Science and Technology, 106, 105983.
[2] Hassan, J., Marsilio, R., Di Cicca, G. M., & Ferlauto, M. (2024). Numerical Study of the Flowfield in a Differentially-Throttled Linear Aerospike. In ICAS PROCEEDINGS. International Council of the Aeronautical Sciences.
[3] Propst, M., Sieder, J., Bach, C., & Tajmar, M. (2014, September). Numerical analysis on an aerodynamically thrust-vectored aerospike nozzle. In Proceedings of the 63rd German Aerospace Congress (DGLR), Augsburg (pp. 16-18).
[4] Kumar, K. N., Gopalsamy, M., Antony, D., Krishnaraj, R., & Viswanadh, C. B. (2017, October). Design and Optimization of Aerospike nozzle using CFD. In IOP conference series: materials science and engineering (Vol. 247, No. 1, p. 012008). IOP Publishing.
[5] Silva, J. C., & Brójo, F. (2024). Aerospike nozzle contour design using Angelino's method and CFD validation. Discover Mechanical Engineering, 3(1), 29.
[6] Harroun, A., Heister, S. D., & Ruf, J. H. (2020). Experimental Validation of Nozzle Flow Simulations for Rocket Application Rotating Detonation Engines. In AIAA Scitech 2020 Forum (p. 0198).
[7] Liu, X. Y., Cheng, M., Zhang, Y. Z., & Wang, J. P. (2022). Design and optimization of aerospike nozzle for rotating detonation engine. Aerospace Science and Technology, 120, 107300.
[8] Harroun, A., Heister, S. D., Sardeshmukh, S. V., & Ruf, J. H. (2019). Effect of Aerospike Plug Nozzle Design on Rotating Detonation Engine Performance for Rocket Applications. In AIAA Scitech 2019 Forum (p. 0197).
[9] Dakka Dr, S., & Dennison, O. (2021). Numerical analysis of aerospike engine nozzle performance at various truncation lengths. International Journal of Aviation, Aeronautics, and Aerospace, 8(2), 12.
[10] Silva, J. P. C. (2023). Linear Aerospike Contour Design using Angelino's Method and CFD Validation (Doctoral dissertation).
[11] Nair, P. P., Suryan, A., & Kim, H. D. (2017). Computational study of performance characteristics for truncated conical aerospike nozzles. Journal of Thermal Science, 26, 483-489.
[12] Bindal, R., Joshi, V., Mishra, A. K., Ashraf, T., & Sonawane, C. R. (2024, January). Flow Characteristics Study on Aerospike Nozzle for Varying Lengths Using CFD Method. In International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (pp. 67-79). Singapore: Springer Nature Singapore.
[13] Jourdaine, N., Tsuboi, N., Ozawa, K., Kojima, T., & Hayashi, A. K. (2019). Three-dimensional numerical thrust performance analysis of hydrogen fuel mixture rotating detonation engine with aerospike nozzle. Proceedings of the Combustion Institute, 37(3), 3443-3451.
[14] Jacobs, G. B., Chai, J., Pyle, Z., Sedano, N., & Davoudzadeh, F. (2021). Aerospike Flow Simulation: from RANS to LES. In AIAA Propulsion and Energy 2021 Forum (p. 3693).
[15] Balaji, G., Kumar, B. N., Vijayarangam, J., Vasudevan, A., & Pandiyarajan, R. (2021). Numerical investigation of expansion Fan optimization of truncated annular aerospike nozzle. Materials Today: Proceedings, 46, 4283-4288.
[16] Kurita, N., Jourdaine, N. H., Tsuboi, N., Ozawa, K., Hayashi, K. A., & Kojima, T. (2020). Three-dimensional numerical simulation on hydrogen/air rotating detonation engine with aerospike nozzle: effects of nozzle geometries. In AIAA scitech 2020 Forum (p. 0688).
[17] Ha, D. S., & Kim, H. J. (2022). Dynamic characteristic modeling and simulation of an aerospike-shaped pintle nozzle for variable thrust of a solid rocket motor. Acta Astronautica, 201, 364-375.
[18] Lamas De La Riva, E. (2024). Numerical analysis of an axisymmetrical toroidal aerospike (Bachelor's thesis, Universitat Politècnica de Catalunya).
[19] Harroun, A. J., Heister, S. D., & Ruf, J. H. (2020). Experimental Validation of Nozzle Flow Simulations for Rotating Detonation Rocket Engines (No. M19-7788).
Downloads: | 980 |
---|---|
Visits: | 97634 |
Sponsors, Associates, and Links
-
International Journal of Geological Resources and Geological Engineering
-
Big Geospatial Data and Data Science
-
Solid Earth and Space Physics
-
Environment and Climate Protection
-
Journal of Cartography and Geographic Information Systems
-
Environment, Resource and Ecology Journal
-
Offshore and Polar Engineering
-
Physical and Human Geography
-
Journal of Atmospheric Physics and Atmospheric Environment
-
Trends in Meteorology
-
Journal of Coastal Engineering Research
-
Focus on Plant Protection
-
Toxicology and Health of Environment
-
Advances in Physical Oceanography
-
Biology, Chemistry, and Geology in Marine
-
Water-Soil, Biological Environment and Energy
-
Geodesy and Geophysics
-
Journal of Structural and Quaternary Geology
-
Journal of Sedimentary Geology
-
International Journal of Polar Social Research and Review